Remember how just a little less than a year ago there was no bleach, no antibacterial wipes, no rubbing alcohol, no toilet cleaner, no paper towels, no NOTHING in the way of cleaning supplies on store shelves. The stores looked as if a tsunami had raged through and swept away all the cleaning and paper products, along with all the rice, beans, flour, sugar, salt, and yeast. So many empty shelves!
Now that most things have finally reappeared, there still is NO daily shower cleaner - you know, the stuff you spray on the shower walls and door or curtain before you get out to get dried off. I used to buy six spray bottles at a time because we have three bathrooms and I didn't want to have that on my shopping list every time I went to the store. But alas, I haven't been able to buy any for months and months.
When the final spray bottle ran dry, I got tired of not having my shower cleaner for lazy people. I say "for lazy people" because if you truly use it DAILY, you shouldn't have to get in the shower and scrub the walls, EVER. I know I don't.
Sooooo...
I made my own!
It wasn't all that hard. I still had the last bottle of my preferred daily shower cleaner, so I read the label. Then, just to make absolutely sure, I went to the manufacturer's website, found the complete ingredients list, and got to it - put that chemistry degree back to work!
The main ingredients were water (big shock there - NOT), detergents (another non-surprise), surfactants (so things won't suds up too much), chelating agents (to tie up metals and prevent soap scum), alcohol (to dissolve oils and soap, make the solution sheet off the walls instead of forming water beads, and to make it evaporate more quickly), and some anti-mold and anti-bacterial agents. So that was where to start.
After comparing labels and manufacturers' websites again, it was clear that making daily shower cleaner wouldn't be all that complicated. By that time during the pandemic, rubbing alcohol wasn't as difficult to find in the stores as it had been, so instead of ethanol (it would probably have to have been vodka - too expensive), good old isopropyl alcohol would be a good substitute. For the anti-bacterial and anti-mold agents, I went straight to the top - Lysol! And for the low-sudsing detergent and chelating agents, Tide HE was already in the house. Lysol (the kind you mix for mopping floors) was still a little scarce in the stores, but CVS and Lowe's had it in stock.![]() |
Here's the Lysol I used. |
![]() |
Here's what it looks like when I'm done. |
TO USE: After your shower (and while you're still IN the shower), turn off the water and spray the wet walls and door/shower curtain with the solution, with the nozzle a foot or two away from the surface. You just want to mist the surfaces, but completely. If you have a hand-held showerhead, turn the water on about half pressure and rinse the surfaces QUICKLY. Don't worry about getting all the cleaning solution off. Step out of the shower. You're done. You don't have to do this after every single shower in a day - once is enough - but consistency is important. Pretty soon it will just be a habit and you won't even have to think about it.
Have never tried the commercial version, but just might give your version a try. Thanks for making sure I never lose the recipe!
ReplyDelete